RGBTOHDMI for Amstrad CPC 464/664/6128, BBC/Master/Compactand Black Spectrum +2/+3

Questions and Answers

• Soru: How does audio work? Is it passed through HDMI, or do you need to connect audio separately using the 3.5mm audio out on the amstrad cpc 464?

  Gönderen t***i (1) - 06/11/2023  06:05:29

  Cevap: Hi, There is no audio at the moment, though this is being worked on, but no promises.

• Soru: Which colour cable is for the Amstrad CPC?

  Gönderen c***5 (1) - 27/05/2022  11:34:48

  Cevap: The darker colour one, it'should be the ozone that fits as it'stands six pin the other key for Spectrums is 8 pin.

• Soru: The options are quite confusing, what optionsdo I need to connect to the majority of my systems: BBC Masteer, BBC Electron, Sinclair QL, Sinclair Spectrum 48K, Dragon 32, Amiga 500, Atari STE, TI4499/A. I asume extra cables and adaptors would be required, and if so can you supply.

  Gönderen K***e (9) - 25/03/2022  13:36:35

  Cevap: There are quite a few options as different boards are needed. The BBC, Electron and QL can only uuse the basic CPLD hat, the issue here is that the different cables are connected inside the casing so you would need to take everything out of the casing to change systems. The ST variant only works with the normal dip style shifter not the square shifter, to use with the square shifter needs everything soldered., this kit can be used with the A500. Finally for the Spectrum 48k,, Dragon and TI you need the version with the Analog board, however the Spectruum 48k connects via the edge connectors and does not give bright variant colours, and bother the Dragon and TI may require add-on AL soldering in the machine, please see - https://github.com/hoglet67/RGBtoHDMI/wiki/Cables

• Soru: Is it OK to power this from the USB port on my monitor? (Its worked fine so far :)

  Gönderen j***m (2) - 19/03/2022  13:03:20

  Cevap: If it's cable of powering a Raspberry Pi then yes.

• Soru: Which one do I need for an Acorn Electron , BBC Model B, ZX Spectrum+3, Atari 1040STE please? Can you also advise what mod is needed on a C64 breadbin or C64C to use RGB2HDMI please?

  Gönderen a***s (3) - 10/02/2022  20:00:56

  Cevap: Hi, the cheaper £44.99 one will work, but you'll need to have your own Raspberry Pi for that, any version that supports the BBC will support the Electron.

• Soru: will this be ok for the toastrack?

  Gönderen r***2 (7) - 27/11/2021  22:13:24

  Cevap: Hi, for the Toastrack rack 128k Sinclair Spectruum or the Grey first version +2 you will need the other version which is cheaper at £55 but works with less systems.

• You need to be logged in to ask a question